Melpool pH powder (1.5 kg)

Melpool pH- Powder 1.5KG – Essential for a stable and healthy water balance
A correct pH value (7.2 - 7.6) is crucial for effective water disinfection and clear pool water. Melpool pH- lowers and stabilizes the pH value, so that chlorine works optimally, limescale is reduced and skin and eye irritation is prevented. This product also lowers Total Alkalinity (TA), which is important for stable water chemistry.

Why choose Melpool pH-?
✔ Lowers and stabilizes pH – Essential for good water balance.
✔ Improves chlorine performance – Prevents inefficient disinfection.
✔ Prevents limescale and clouding – Especially helpful with hard water.
✔ Fast-dissolving granulate – Easy to add and effective.
✔ Also lowers Total Alkalinity (TA) – Essential for stable pH.

How to use Melpool pH-?
? For pH reduction (per 10 m³ of water):

80 g lowers pH by approx. 0.1.
Maximum dosage per treatment: 300 g.
For further correction: Wait at least 12 hours between treatments.
? For TA reduction (per 10 m³ of water):

180 g reduces the TA by approx. 10 ppm (mg/l).
? Application:

Measure the pH and TA value and determine the required amount of Melpool pH-.
Dissolve the granulate in a bucket of lukewarm water and distribute evenly over the pool.
Let the pump run for 3-4 hours for optimal distribution.
Check the pH value again and repeat if necessary.
Important tips for optimal results:
? Keep the pH value between 7.2 and 7.6 for optimal disinfection.
? TA too high? Use Melpool pH- to lower it.
? Do not sprinkle directly into the pool – This can stain the bottom.
? Do not mix with other chemicals – Always add separately to the water.

With Melpool pH- Powder you keep your pool or spa perfectly balanced, prevent high pH levels and limescale and enjoy clean and clear water! ?￢ﾜﾨ