Melpool ICA Chlorine Stabilizer 0.8 kg

Melpool ICA Chlorine Stabilizer 0.8KG – Longer chlorine effect and less consumption
Sunlight can quickly break down chlorine in pool water, requiring you to top up more often. Melpool ICA Chlorine Stabilizer prevents this by protecting chlorine from UV radiation, so it stays active for longer. This saves you chlorine and maintains a constant water quality in your pool.

Why choose Melpool ICA?
✔ Protects chlorine against UV radiation - Prevents rapid breakdown.
✔ Saves on chlorine use - Stabilizes and extends the effect of chlorine.
✔ Ensures a stable water balance - Fewer fluctuations in disinfection.
✔ Suitable for soft and hard water - Works under various conditions.
✔ Easy to use - Dissolve in warm water or distribute evenly.

How do you use Melpool ICA?
? Dosage (per 10 m³ of water):

100 g increases the concentration by 10 ppm (mg/l).
Beginning of the season: add 200-500 g per 10 m³.
Ideal Cyanuric acid value: 20-50 ppm (mg/l).
Maximum value: 70-100 ppm (mg/l) (partially change the pool water at higher values).
? Application:

Dissolve the correct amount in a bucket of warm water.
Pour the solution evenly over the water surface.
Let the pump run for 3-4 hours for optimal distribution.
Check the chlorine and cyanuric acid values and adjust if necessary.
Important tips for optimal results:
? Only use with non-stabilized chlorine such as Melpool 70/G or Melpool 70/20.
? Partially change the pool water at high concentrations (>70 ppm).
? Keep the pH value between 7.2 and 7.6 for best results.
? Do not mix with other pool chemicals – always dose separately.

With Melpool ICA Chlorine Stabilizer your pool water stays clean and clear for longer, while you need to use less chlorine! ?￢ﾜﾨ